GM 700R4 Performance Transmission Level 3

$3,995.00

-

Core Charge $650 box option

Horse Power: 500
(Up to 500 ft-lbs Torque)
Converter: Custom Built & Custom Stalled 10” Custom Built Lock-Up with Billet Cover
Stall: 2600-3600
Available as 4X4

CORE CHARGE: $650.00
ATF: $100.00

SKU: GS700R4L3 Categories: , , ,
* Core transmissions must be received by Gearstar within 30 days of receiving your new transmission to be considered eligible for a credit or refund.

Description

700-R4 – Level 3 – Transmission with Torque Converter

Email this page to a friend

Horse Power: 500
(Up to 500 ft-lbs Torque)
Converter: Custom Built & Custom Stalled 10” Custom Built Lock-Up with Billet Cover
Stall: 2600-3600

Master Overhaul Kit with High Energy Frictions and Hardened Steels
Wide Carbon Fiber 2-4 Band
2 Transgo Recalibration Shift Kit with Shift Command
New Valve Body Separator Plate
Original Equipment Style Filter
Corvette Servo
New Torrington Bearings
Bushing Kit
Thrust Washer Kit
New 29-Element Dual Cage Sprag
New Low-Reverse Spring & Roller
High Capacity 10-Vane Pump Assembly with New Rotor and Slide
New Vanes and Hardened Rings
0.500 Boost Valve
Updated Pressure Regulator Valve
Reinforced Input Drum
Extra Capacity 3-4 Clutch Drum Assembly with High-Rev Spring Kit
Heavy Duty Hardened Sun Shell
A New Original Equipment Steel Transmission Pan
New Speedometer Drive Gear
New Speedometer Driven Gear
Vacuum Lock-Up System
Installation Kit: Universal Fill Tube and Stick, Universal Throttle Valve Pressure Cable, Universal Transmission Mount, Universal Converter Cover (Chrome)


CORE CHARGE: $650.00
ATF: $100.00


Gearstar Has Your Back


AVAILABLE AT ADDITIONAL COST

*30,000 GVW Hayden Cooler with Integrated Fan – Call for Pricing
*Geometry Kit for Holley or Edelbrock Carburetors – Call for Pricing
*Lokar Installation Kit: Lokar Flexible Fill Tube and Stick, Lokar Throttle Valve Pressure Cable and Carburetor Bracket – Call for Pricing
*Heavy Duty Close Quarter Case – Call for Pricing
*Deep Cast Aluminum Transmission Pan – Call for Pricing


Full Manual Forward Pattern Valve Body Available – Call for Details and Pricing


All transmissions are custom built by 1 of 5 master techs from start to finish and DYNO tested with converter the equivalent of 100 miles to insure that transmission and converter package are in perfect operating condition before they leave our facility.


All sales are final. No returns or refunds.

Gear Ratios
1st 3.06
2nd 1.62
3rd 1.00
4th 0.70

Dimensions
Measurements are taken from mounting surface where trans meets engine block to the tip of the tailshaft
Total Length: 31″ 2WD Only
Distance to trans mount center: 22 3/4″

Ready to experience top-notch transmission solutions and expert support?

Contact Us Today!