Categories
Transmission & Drivetrain

TH350 Transmission Identification, Decoding and Super-Tuning

The TH350 (Turbo-Hydramatic) transmission identification, decoding, and super-tuning are what sets it apart from other transmissions. Its identification, for instance, helps you to differentiate this one-piece unit from other transmissions launched by General Motors.

And the super-tuning of this unit ensures that you can improve its performance to be a ride worth taking on fast and hard spins. Now this and many more are what we’ve outlined below. Therefore, work with us let’s show you all you need to know about this unit.

TH350 Transmissions 101

The TH350 transmission is a three-speed automatic transmission launched by General Motors in vehicles from 1968. It can also be said this model was created as a collaboration between Chevrolet and Buick, where the transmission was made to be compact, strong, and versatile.

On the other hand, the TH350 was to serve as a replacement to the Powerglide transmission, which is a two-speed automatic transmission. Cars that used the TH350 transmission include those from the late 1960s, as well as some GM all rear-wheel-drive vehicles launched in 1984.

The transmission model was used in these cars until the early 1980s when the 700R4 transmission was launched. That being said, chances that you’re using a GM vehicle with the TH350 transmission are high if the car is a model launched around these years.

TH350 Transmission Identification

The TH350 transmission is 21-3/4″ long and its body is made of aluminum alloy. The unit comes with a bell housing and weighs 120 lbs. Here is a list of steps that will help you to identify the TH350 transmission:

1. Set Up the Wheel Chocks

Adjust the wheel chocks at the back of the tires to ensure that the vehicle is firmly rooted to the ground. Use your jack to lift the vehicle slightly while also ensuring that the jack sits securely beneath the frame rails.

You can then lower the car onto the stands. Slide beneath the vehicle and find the transmission. This transmission is mostly stationed at the rear-wheel of cars hence, its location may be the same in yours.

2. Count the Number of Bolts

Ascertain the number of bolts that are secured to the transmission oil pan. And if the number of bolts is around 13, then it means the unit is either a TH350 or TH400. On the other hand, the transmission oil pan is usually bolted to the transmission bottom.

However, you can tell if it is a TH350 or TH400 depending on the transmission oil pan’s shape. If the pan is square in shape and looks five-sided due to a cut in one corner, then you are dealing with the TH350.

3. Check the Length of the Transmission

It is also important to measure the length of the transmission. This measurement should be taken from the front and from where it bolts to the back of the engine to the transmission’s end that links the tailshaft housing.

On the other hand, there’s no need to measure the tailshaft housing and this is an adapter with a cone-shape design. It is worth noting that the length may range from 22 ¼ to 22 ¾ inches if it is the TH350 transmission.

4. Find the Vacuum Modulator

The next step is to find the vacuum modulator. This modulator has been stationed at the transmission’s side and there may be a rubber vacuum line connected to it. You’ll know it’s the TH350 if you have the fitting attached to the right frontal side of the transmission. However, it is the TH400 if this fitting is at the transmission’s front-rear side.

5. Check the Connection

There’s a cable that may be connected to the transmission’s side and next to the location of the shifter linkage. In this case, you are to ascertain if the cable is connected to the engine. The cable is a kick-down cable and the TH350 has this cable whereas the TH400 does not have this feature.

TH350 Decoding

One more thing you can fall back on to identify the TH350 is the stampings placed on the transmission’s side. The part codes that may be evident include the M33, M38 & M39 and these codes were for the conventional TH350.

On the contrary, the TH350C, a variant of the TH350 that has a lock-up torque converter had codes including MV4, MX2, MX3 & MX5. Asides from this, other variants of the TH350 were launched and these are the TH200, TH200C, TH250, TH250C and TH375.

TH350 Super-Tuning

Super-tuning the TH350 transmission involves modifying the stock transmission to ensure it is suited for street or strip use. The stock transmission may be able to withstand the impact but only to a certain degree, which brings about the need for super tuning to handle high-performance applications.

And using this transmission comes with an advantage since many car enthusiasts believe that out of all GM transmissions, it is the budget high-performance automatic ride. Therefore, you can carry out inexpensive changes to this transmission even without taking it out of the car. Here’s what you need to begin:

1. Modifications to Certain Components

Changes in components like the governor alterations, valve body recalibration, and modulator swaps can improve the TH350 transmission. By improvement, you can expect enhanced shift timing. These modifications can be made without removing the transmission from the car.

2. Upgrades

Specific upgrades are needed if your transmission will be used in applications that transmit 400 lbs-ft of torque or higher through the transmission. The limit will be dependent on the vehicle’s gear ratio, weight, driving style, and even traction.

3. Other Minor Upgrades

A TH350 rebuilt is not complete unless you have a high-performance clutches and even reducing the friction. This setup will enable the transmission to send more power to the wheels, which could also increase durability.

And if you’re wondering how you’ll reduce the unit’s friction, you can start by using needle roller bearings. These bearings can be used at the front planetary pinion carrier as well as the rear planetary ring gear.

The Bottom Line

Now that you know the TH350 transmission identification, decoding, and super-tuning, you have a better knowledge of your transmission. In the same vein, you’re well informed on how to improve it to be more durable and handle street racing. And given that this is a transmission that has stood the test of time, its rebuild will yield even more impressive results.

Exit mobile version