Description
APPLICATION: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 CHEVROLET, GMC, CADILLAC AND HUMMER TRUCK ENGINES (DRIVE BY CABLE ONLY) WITH MULTEC INJECTORS & 4L60E OR 4L80E TRANSMISSIONS USING RED/BLUE 411 P01 PCM<br> <br> PARTS INCLUDED: Complete engine and transmission Harness, Instruction Manual<br> <br> ADDITIONAL ITEMS REQUIRED: RED/BLUE 411 P01 PCM<br> <br> ENGINE REQUIREMENTS - <br> <br> This harness REQUIRES to be paired with following default options on this configuration <br> <br> 5 Pin MAF (Mass Air Flow sensor) Sensor – ACC-1015<br> Delphi MAP (Manifold Absolute Pressure) Sensor – 12614970 – ACC-1131<br> 4 Pin Alternator – GM Truck – Any - 2001-2005<br> AC Trigger Wire Included – Drive By Cable Only. <br> <br> Multec injectors come standard on the harness. If you a running a different style injector, refer to the following part numbers.<br> <br> INJ-MUL-EV1<br> INJ-MUL-EV6<br> <br> If you have a 4L80, the following part number is required-<br> <br> EXT-4L80-13<br> <br> CONNECTIONS FOR:<br> Fuse/Relay Box<br> Fuel Pump Control (Relay included)<br> Fan controls (Relays and fuse available separately KIT-1010)<br> Check Engine Light, Speedo output, Tachometer, OBD2 Port<br> IAC and TPS on DBC setups<br> MAF Sensor<br> MAP Sensor<br> Engine Coolant Temp Sensor<br> Alternator Control<br> (2) Upstream Oxygen Sensors<br> Crankshaft Position<br> Camshaft Position<br> Fuel Injectors<br> Coil Packs<br> Automatic or Manual Transmission control<br> Knock Sensors<br> Connections from the Harness You Will Need to Hookup:<br> Fuel Pump (Required)<br> Switched Ignition Power (Required)<br> Malfunction Indicator (Check Engine, MIL, CEL, ETC.)<br> Speedometer<br> Tachometer<br> Fan 1 Relay Control (Low Speed or Single Control)<br> Fan 2 Relay Control (High Speed or Second Fan Control)<br> Fan Relays available separately KIT-1010<br> <br> <br> NOTES: These Harnesses are designed for retrofitting '99 - '03 Vortec engines (4.8, 5.3, 6.0, 6.2-Liter) and 4L60E or 4L80E transmissions into older muscle cars and street rods or newer non-emissions controlled vehicles. Harness allows use of the factory Vortec intake manifold and Multec Injectors with flex-fuel Injectors (EV6) optional. They are completely plug and play with four wire hookup (switched power, constant power and ground connections required). Harnesses are designed with a sliding grommet seal and 4 - 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation.<br> <br> Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. All Harnesses are 100% Quality Inspected prior to shipping. All Harnesses require PCM VATs removal, available through PSI. Please contact PSI for more information.</div>
