Description
4L70E – Level 4 Transmission with Torque Converter
Horse Power: 650
(Up to 650 ft lbs Torque)
Converter: Custom Built & Custom Stalled 10” or 11” Lock-Up Billet Racing
Stall: 1600-3600
1300-2600 Stall Available for Diesel & 4X4
Master Overhaul Kit with Alto Hardened Steels
Raybestos Gen II Racing Frictions
High Capacity Filter
New 29 Element Dual Cage Sprag
High Capacity Upgraded Pump Assembly
New Hardened Pump Rings
A New 13 Vane Pump Rotor
New Vanes
New Stator
.500 Boost Valve
Pressure Regulator Valve
Updated Boost Valve
Transgo Reprogramming Shift Kit with Shift Command
Bushing Kit
New Thrust Washers
Complete Torrington Bearing Kit
Heavy Duty Hardened Sun Shell
Heavy Duty Expanded Capacity Input Drum with Reinforcing Sleeve
High Rev Spring Kit
Heavy Duty 5 Pinion Front and Rear Planetary Gear Set with Sun Gear – AC Delco
300M Hardened Output Shaft
300M Hardened Reaction Shaft and Hub
Super Hold 4th Servo
Corvette Servo
Wide Carbon-Fiber 2-4 Band
New Valve Body Spacer Plate
New Shift Solenoids
A New EPC Solenoid
New PWM Solenoid
New 3/2 Solenoid
A New Manifold Pressure Switch
New Internal Wiring Harness W/New TCC Solenoid
New Electronic Speed Sensor
Inspection Cover (Polished Aluminum)
New Original Equipment Steel Transmission Pan
Transmission Mount
CORE CHARGE: $550.00
ATF: $100
Gearstar Has Your Back
-
- Best Warranty in the Industry
- Telephone Support by Experienced Transmission Professionals
- We ALWAYS Answer the Phone and Return Voicemails
- Installation Guides
- Voted Best Tech Support by Street Rodder Magazine 17 Years in a Row
AVAILABLE AT ADDITIONAL COST:
*Lokar Flexible Filler Tube and Stick – Call for Pricing
*Hayden Cooler 30,000 GVW with optional Integrated Fan – Call for Pricing
HIGHLY RECOMMENDED:
Deep Cast Aluminum Transmission Pan – Call for Pricing
***This transmission requires the use of a standalone controller in non OEM applications.***
Please call for details (330) 434-5216
All transmissions are custom built by 1 of 5 master techs from start to finish and DYNO tested with converter the equivalent of 100 miles to insure that transmission and converter package are in perfect operating condition before they leave our facility.
All sales are final. No returns or refunds.
Gear Ratios | |
1st | 3.06 |
2nd | 1.62 |
3rd | 1.00 |
4th | 0.70 |
Dimensions |
Measurements are taken from mounting surface where trans meets engine block to the tip of the tailshaft |
Total Length: 32″ |
Distance to trans mount center: 24 1/4″ |
Ready to experience top-notch transmission solutions and expert support?