Description
4L65E – Level 3 – Transmission with Torque Converter
Horse Power: 500
(Up to 500 ft lbs Torque)
Converter: 12” High Performance Furnace Brazed with Flanged Hub and Carbon Fiber Clutch
Stall: 2600-3200
1300-2600 Stall Available for Diesel & 4X4
Master Overhaul Kit with Alto Hardened Steels
Raybestos Stage 1 Frictions
Filter
New 29 Element Dual Cage Sprag
High Capacity Upgraded Pump Assembly
New Hardened Pump Rings
A New 13 Vane Pump Rotor
New Vanes
New Stator
.500 Boost Valve
Pressure Regulator Valve
Updated Boost Valve
Transgo Reprogramming Shift Kit with Shift Command
Bushing Kit
New Thrust Washers
Complete Torrington Bearing Kit
Heavy Duty Hardened Sun Shell
Heavy Duty Expanded Capacity Input Drum with Reinforcing Sleeve
New Low/ Rev Heavy Duty Spring and Roller
High Rev Spring Kit
Corvette Servo
Wide Carbon-Fiber 2-4 Band
New Valve Body Spacer Plate
Fill Tube & Stick
New Shift Solenoids
New EPC Solenoid
A New PWM Solenoid
New 3/2 Solenoid
New Manifold Pressure Switch
A New Internal Wiring Harness W/New TCC Solenoid
New Electronic Speed Sensor
Transmission Mount
New Original Equipment Steel Transmission Pan
CORE CHARGE: $350.00
ATF: $100
Gearstar Has Your Back
-
- Best Warranty in the Industry
- Telephone Support by Experienced Transmission Professionals
- We ALWAYS Answer the Phone and Return Voicemails
- Installation Guides
- Voted Best Tech Support by Street Rodder Magazine 17 Years in a Row
AVAILABLE AT ADDITIONAL COST
*30,000 GVW Hayden Cooler with optional Integrated Fan – Call for Pricing
***FITS LS SERIES ENGINES***
***This transmission requires a standalone controller in non OEMÂ applications.***
Please call for details (330) 434-5216
All transmissions are custom built by 1 of 5 master techs from start to finish and DYNO tested with converter the equivalent of 100 miles to insure that transmission and converter package are in perfect operating condition before they leave our facility.
All sales are final. No returns or refunds.
| Gear Ratios | |
| 1st | 3.06 |
| 2nd | 1.62 |
| 3rd | 1.00 |
| 4th | 0.70 |
| 2WD Dimensions |
| Measurements are taken from mounting surface where trans meets engine block to the tip of the tailshaft |
| Total Length: 32″ |
| Distance to trans mount center: 24 1/4″ |
| 4WD Dimensions |
| Measurements are taken from mounting surface where trans meets engine block to the tip of the tailshaft |
| Total Length: 27 1/2″ (Including OE T-Case Adapter Housing) |
| Distance to trans mount center: 24 1/2″ |
Ready to experience top-notch transmission solutions and expert support?
