Description
Description
Mopar 727 Performance Transmission 2wd Small Block Bellhousing - Level 3. Built and tested by GearStar Performance Transmissions.
Performance Specifications
- Torqueflite 727 level 3
- Rated up to 400HP at the crankshaft
- Rated up to 400 ft-lbs. at the crankshaft
- Converter: custom-built heavy-duty furnace brazed stall: 1800-2200
Build Details
- Designed for Small Block Mopar Engines
- Master overhaul kit with high energy frictions and all new steel plates
- Transgo shift kit
- high flow brass filter
- high energy intermediate band
- new low reverse band
- 4 pinion planetary gear set
- 4.2 ratio band lever & strut
- bolt in sprag assembly
- new thrust washers
- new bushing kit
- updated aluminum reverse servo piston
- transmission mount
- neutral safety switch
- new transmission pan
- Mopar 727 Torqueflight
Gear Ratios
- 1st: 2.450
- 2nd: 1.450
- 3rd: 1.000
Dimensions
- Measurements are taken from mounting surface where trans meets engine block to the tip of the tailshaft
- Total Length: 34 3/8"
- Distance to trans mount center: 23 3/4"
Notes
- 2wd 3-year / 50,000-mile warranty
Due to the condition and availability of rebuildable transmission cores, we often have to tear down and inspect as many as three transmission cores to obtain one usable core. This increased labor and material cost is the primary reason for the recent increase in our core charge.
To help avoid the core charge, we encourage customers to send us their transmission core to be rebuilt whenever possible. Alternatively, if you purchase a new transmission from us, you can return your original transmission core after installation, provided it is received within the applicable return period and meets our core acceptance requirements.
