GM 4L65E Performance Transmission Level 2

$3,695.00

-

Core Charge $350 box option

Horse Power: 400
(Up to 400 ft.-lbs. Torque)
Converter: 12” High Performance Furnace Brazed with Flanged Hub and Carbon Fiber Clutch
Stall: 1600-2400
1300-2600 Stall Available for Diesel & 4X4

CORE CHARGE: $350.00
ATF: $100

Categories: , ,
* Core transmissions must be received by Gearstar within 30 days of receiving your new transmission to be considered eligible for a credit or refund.

Description

4L65E – Level 2 – Transmission with Torque Converter

Email this page to a friend
Horse Power: 400
(Up to 400 ft.-lbs. Torque)
Converter: 12” High Performance Furnace Brazed with Flanged Hub and Carbon Fiber Clutch
Stall: 1600-2400
1300-2600 Stall Available for Diesel & 4X4

Master Overhaul Kit with High Energy Frictions and New Steel Plates
Wide Carbon Fiber 2-4 Band
Transgo Recalibration Shift Kit
New Valve Body Separator Plate
Original Equipment Style Filter
New Internal Wiring Harness with TCC Solenoid
New Shift Solenoids
A New EPC Solenoid
New PWM Solenoid
New 3/2 Control Solenoid
Corvette Servo
New Torrington Bearings
Bushing Kit
Thrust Washer Kit
New 29-Element Dual Cage Sprag
New Low-Reverse Spring & Roller
High Capacity 10-Vane Pump Assembly with New Rotor and Slide
New Vanes and Hardened Rings
Updated Pressure Regulator Valve and Boost Sleeve
Extra Capacity 3-4 Clutch Drum Assembly with High-Rev Spring Kit
Hardened Sun Shell
New Original Equipment Steel Transmission Pan
Installation Kit: Universal Fill Tube and Stick, Universal Transmission Mount


CORE CHARGE: $350.00
ATF: $100


Gearstar Has Your Back


AVAILABLE AT ADDITIONAL COST

*30,000 GVW Hayden Cooler with Integrated Fan – Call for Pricing
*20,000 GVW Hayden Transmission Cooler – Call for Pricing
*Lokar Flexible Fill Tube and Stick – Call for Pricing
*Polished Aluminum Transmission Pan with Drain Plug – Call for Pricing


***FITS LS SERIES ENGINES***

***This transmission requires a stand alone controller in non OEM applications.***

Please call for details (330) 434-5216

All transmissions are custom built by 1 of 5 master techs from start to finish and DYNO tested with converter the equivalent of 100 miles to insure that transmission and converter package are in perfect operating condition before they leave our facility.

All sales are final. No returns or refunds.


Gear Ratios
1st 3.06
2nd 1.62
3rd 1.00
4th 0.70

2WD Dimensions
Measurements are taken from mounting surface where trans meets engine block to the tip of the tailshaft
Total Length: 32″
Distance to trans mount center: 24 1/4″

 

4WD Dimensions
Measurements are taken from mounting surface where trans meets engine block to the tip of the tailshaft
Total Length: 27 1/2″ (Including OE T-Case Adapter Housing)
Distance to trans mount center: 24 1/2″

Ready to experience top-notch transmission solutions and expert support?

Contact Us Today!