GM 4L80E Performance Transmission Level 3

$3,995.00

Horse Power: 600
(Up to 600 ft-lbs Torque)
Converter: 10” Custom Built Lock-Up Billet Racing
Stall: 2600-3600

CORE CHARGE: $650
ATF: $100

4L80E – Level 3 Transmission with Torque Converter

Horse Power: 600
(Up to 600 ft-lbs Torque)
Converter: 10” Custom Built Lock-Up Billet Racing
Stall: 2600-3600

Master Overhaul Kit with Alto Hardened Kolene Steels
Raybestos Stage I Frictions
Transgo Reprogramming Kit
Filter
New Torrington Bearing Kit
New Bushing Kit
New Thrust Washer Kit
New Internal Wiring Harness
New Manifold Pressure Switch
New EPC Solenoid
New PWM Solenoid
New Input & Output Speed Sensors
New 1-2 Shift Solenoid
New 3-4 Shift Solenoid
Expanded Capacity Forward Clutch Drum
Extra Capacity Second Gear Clutch Assembly
Expanded Capacity Third Clutch Drum
Heat Treated Input Shaft
Heat Treated Main Shaft
Heat Treated Forward Steel Clutch Hub
Updated Molded Steel Direct Clutch Piston
Updated Reverse Band
New Low Roller Assembly
Wide Kickdown Band w/New Apply Piston
Heavy Duty Intermediate Sprag
Updated Boost Valve
Updated TCC Regulator Valve
Blue Printed Pump & Valve Body
Transmission Mount
Lokar Flexible Filler Tube and Stick: Available at additional cost
New OEM Steel Pan
30,000 GVW Cooler

CORE CHARGE: $650
ATF: $100

AVAILABLE AT ADDITIONAL COST:

*30,000 GVW Cooler with Integrated Fan – Call for Pricing

*Cast Aluminum Pan – Call for Pricing

***This transmission requires the use of a standalone controller.***

Please call for details (330) 434-5216

All transmissions are custom built by 1 of 5 master techs from start to finish and DYNO tested with converter the equivalent of 100 miles to insure that transmission and converter package are in perfect operating condition before they leave our facility.

All sales are final. No returns or refunds.

Gear Ratio’s
1st2.48
2nd1.48
3rd1.00
4th0.75
2WD Dimensions
Measurements are taken from mounting surface where trans meets engine block to the tip of the tailshaft
Total Length: 31″
Distance to trans mount center: 30 1/2″
4WD Dimensions
Measurements are taken from mounting surface where trans meets engine block to the tip of the tailshaft
Total Length: 28 1/2″ (Including OE T-Case Adapter Housing)
Distance to trans mount center: 27″

Includes:
Torque Converter